Elterm 24 Emulator

The Elterm 24 is a simple OperaTor interface "Dumb" terminal designed to operate with an intelligent control. The Terminal has two primary functions: Display data/messages sent from the control on its screen Transmit key presses to the control via its keypad It is an ideal terminal for the control of stepper and servo motor drives. To evaluate this ELTERM and to test the programs inside the motion controls this "emulator" can be used. It functions the same as the real one. SpecificationsDisplay: 4 lines with 20 characters with LED background illumination. Powersupply 12 to 24 VDC, about 300 mA Communication parameters: RS485, 4 wires, 9600 Baud, 1 startbit, 8 databits, 1 stopbit All printable received ASCII characters go to the display. The non-printable characters, like Carriage Return (CR) are processed and executed. When a key is pressed, the character is transmitted, and after a delay of about 0.5 second, when the key is still pressed, the same character is re transmitted at a speed of 10 characters per second. The ELTERM has an internal receive buffer of 40 characters.